Products List
-
Burnt Sugar Shaker - Matching Tall End Panel 96"
BSS-CS-MTEP96$483.63MSRP $731.10Matching Tall End Panel for Pantry or Stacked cabinets 23 1/4" wide -
Burnt Sugar Shaker - Matching Tall End Panel 90"
BSS-CS-MTEP90$452.95MSRP $684.73Matching Tall End Panel for Pantry or Stacked cabinets 23 1/4" wide -
Burnt Sugar Shaker - Matching Tall End Panel 84
BSS-CS-MTEP84$422.50MSRP $638.70Matching Tall End Panel for Pantry or Stacked cabinets 23 1/4" wide -
Burnt Sugar Shaker - Bead Board
BSS-CS-BBFBP4896$399.04MSRP $603.24Bead Board 1/4" thick panel It Meassures 48"Wx96"L -
Burnt Sugar Shaker - Base Microwave Cabinet 27
BSS-CS-BMC27$372.51MSRP $563.12To be used for a microwave in a base cabinet -
Burnt Sugar Shaker - RTA Range Hood Front 36
BSS-CS-RHF36$314.14MSRP $453.31Range Hood Front Must be installed between two cabinets for support Before installation of the RHF occurs, the blower should be installed and the depth adjusted using fillers and/or panels to fit... -
Burnt Sugar Shaker - RTA Stained Plywood Edges Banded
BSS-CS-PLYEB42$307.80MSRP $465.26Stained Plywood Sold in 8 ft long sections 42" wide, edges banded 3/4" thick All 6 edges are finished stained -
Burnt Sugar Shaker - Tall Wall Filler 6" x 96"
BSS-CS-TF696$289.78MSRP $438.06Tall Wall Filler 3/4" thick Can be trimmed to desired height and/or width -
Burnt Sugar Shaker - RTA Range Hood Front 30"
BSS-CS-RHF30$280.13MSRP $423.47Range Hood Front Must be installed between two cabinets for support Before installation of the RHF occurs, the blower should be installed and the depth adjusted using fillers and/or panels to fit... -
Burnt Sugar Shaker - RTA Appliance Garage
BSS-CS-AG2418$271.44MSRP $373.04Appliance Garage is designed for installation on countertop Fits directly below a wall diagonal corner cabinet There are no shelves in this cabinet -
Burnt Sugar Shaker - Wall Filler 6" x 96"
BSS-CS-WF696$263.71Wall Filler 3/4” thick Can be trimmed to size May be used either left or right -
Burnt Sugar Shaker - Plate Rack
BSS-CS-PR3015$221.17MSRP $345.77Plate Rack 30"X15" It Measures 30"Wx15"H. Will hold ten plates.